Siemens SiPass integrated Скачать руководство пользователя страница 29

Страница: 29 / 66

Host event tasks

Sources

A6V11144326

29 | 66

Source

State (trigger)

Description

Intrusion Control

Enabled

Intrusion Control has been enabled at the access

point.

Invalid

A host event task is triggered when a point

enters any alarm state, assuming that an alarm

class has been configured for the access point.

Invalid Dual Custody An Invalid Dual Custody event has occurred.

No Entry

A host event task is triggered if the access point

is set to “De

layed Reporting” mode and a valid

card has been badged at a reader, but the door

monitor has not registered passage through the

door.

Operator Alarm

A host event task is triggered when the

nominated access point goes into alarm.

Operator Alarm

Actioned

A host event task is triggered, when an alarm

associated with the nominated access point, is

actioned by an operator.

Operator Alarm Not

Actioned

A host event task is triggered when the operator

fails to action an alarm associated with the

nominated access point before the (re-activation)

timeout.

Operator Alarm

Timed out

A host event task is triggered when the operator

fails to action the alarm associated with the

access point and the alarm time-out.

Operator Normal

A host event task is triggered when the

nominated access point changes to a normal

state.

Operator Restore

A host event task is triggered when the

nominated access point

attains ‘Restored’ status.

Operator Waiting for

Normal

A host event task is triggered when a restorable

alarm at the nominated point has been ac-tioned

but has not returned to its normal state.

PIN Error Disabled

A card has been voided after the cardholder has

made three consecutive incorrect PIN entries in

the facility.

Reader Offline

A host event task is triggered when a reader

enters the offline state. Only valid for the

Siemens reader range.

Reader Online

A host event task is triggered when a reader

enters the online state. Only valid for the

Siemens reader range.

Reader Tamper

A host event task is triggered when a reader

enters the tamper state (tamper input activated).

Only valid for the Siemens reader range.

SALTO Battery Low A SALTO offline door requires a battery change.

SALTO PPD

Connection

A PPD has been connected to a SALTO offline

door to update the door.

SALTO System

Offline

SiPass integrated is not connected to the SALTO

System.

SALTO System

Online

SiPass integrated is connected to the SALTO

System.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 29 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: