Siemens SiPass integrated Скачать руководство пользователя страница 39

Страница: 39 / 66

Host event tasks

Targets / Commands

A6V11144326

39 | 66

Target

Command

Description

Slow Pulse Output

The output will pulse slowly. For example, this

could be used for alarms that utilize a pulsed

output like strobes or sirens.
Enter the time that you want the output to slow

pulse into the Data field, using the format

HH:MM:SS.

Fast Pulse Output

The output will pulse quickly. For example, this

could be used for alarms that utilize a pulsed

output like strobes or sirens.
Enter the time that you want the output to fast

pulse into the Data field, using the format

HH:MM:SS.

Single Pulse

The output will emit a single pulse.

Return to Time

Schedule control

The output will return to normal Time Schedule

control.

Cancel Permanent

Action

Any current Permanent Command or Event

Task, or Access/Internal Action operating on the

target will be cancelled. The next Control State in

the Control State Queue will take effect.

Unlock, Override Door

Interlocking

Unlocks the output and ignores any Door

Interlocking configuration.

Allow Access,

Override Door

Interlocking

Allows access and ignores any Door Interlocking

configuration.

Output Point

Group

Same as Output

Points

See above

Reporting

Print the selected report.

SaveAs

Exports the selected report to a file.

Email Forwarding

Export the selected report to a file and then email

it to selected cardholders.

System

Turn Printer Off

Turns the Audit Trail printer off.

Turn Printer On

Turns the Audit Trail printer on.

Turn Printer to Short

Log

Sets the Audit Trail messages (printed) to

summary form (not all columns are sent to the

printer).

Turn Print to Full Log Sets the Audit Trail messages (printed) to all

columns that can appear in the Audit Trail.

Check Expired Cards When cards are presented for verification at an

access point, their expiry dates are checked.

Check Before Start

Date Cards

When cards are presented for verification at an

access point, their start dates are checked.

Execute Command

Executes a command. (Typically, this would be

used to start an executable (.EXE) or batch

command (.BAT) file.
Enter the path and filename of the file into the

Data field.
For example, C:\Program Files\myfile.bat

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 39 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: