Siemens SiPass integrated Скачать руководство пользователя страница 17

Страница: 17 / 66

Alarm Class

A6V11144326

17 | 66

Type

Status

Description

Input tamper

The input or wiring has been tampered with.

Input open

The input is an open circuit.

Card limit reached

The unit’s card limit has been exceeded

Passback tamper

A supervised passback input has detected a

tamper.

Input Disabled

The input has been disabled.

Input Faulty

The input is not recognised

Input Physically disabled

at FLN device

The input has been physically disabled by

setting jumpers on the device.

Sintony Input Unsealed

The Sintony input is active and may prevent

the area from being armed (depending on

the configuration)

Intrusion Area

Intrusion Area Armed

The intrusion area has been armed.

Normal

An intrusion area that was in an alarm state

has now returned to the normal state.

Arming Action Complete

An attempt to arm a dependant intrusion

area was made. However, other areas

dependant on this area are still unarmed.

Intrusion Area Part Armed The intrusion area has been part armed.

Intrusion Area Part Armed

The SPC intrusion area has been part armed

B. (SPC only)

Intrusion Area Disarmed

The intrusion area has been disarmed.

Alarm

An armed intrusion area has been violated.

Arming Failed

An attempt to arm an intrusion area has

failed.

OPC Point

Normal

The OPC Point is in a normal state.

Acked Alarm

The OPC Point is in alarm, but the alarm has

been acknowledged.

Unacked Normal

The OPC Point is in a normal state after an

alarm, but has not been acknowledged.

Disabled

The OPC Point is disabled.

Alarm

The OPC Point is in alarm.

Output

Locked

The output is secure.

Output Enabled

The output has been enabled.

Unlocked

The output is not secure.

The output is not secure. The output has been disabled.

Output Open

Output is in an open status

Unit

Communication back

Communication between the unit and the

server is active.

Unit reset

A unit has been reset.

Unit Tamper inactive

The tamper input on a unit is inactive

Power Returned

Power has been applied to the unit.

Содержание SiPass integrated



































































Результаты поиска

Содержание SiPass integrated

Отзывы:

Siemens SiPass integrated, Справочное руководство, Страница: 17 / 66

Результаты поиска

Содержание SiPass integrated

Отзывы: