Siemens SINUMERIK, Руководство по вводу в эксплуатацию

Страница: 49 / 736

Configuring the HMI system
2.1 Processing INI files
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
43
There are different parameterization options for the names of the text files when assigning
the text path.
The following table lists the parameterization options and their interpretation by the Help
function:
Parameters for the text file Interpretation
FileName.com The text file that is independent of the language is read-out
File name_XX.com The language-dependent text file is read out
FileName_.com In this setting the non-language-specific test file is read first,
if present, otherwise the language-specific text is read.
(XX = abbreviation for languages, e.g. "GR" for German)
Example: Enduser=Cus.dir\Ifm_.com
First of all, the non-language-specific text file "Ifm.com" is opened in the path
"C:\Dh\Cus.dir\" by default or, if the non-language-specific text file does not exist, the
relevant language-specific text file (e.g. "lfm_gr.com") is opened.
Extract from Short Help txt file "Ifm_gr.com":
...
a2//G00/Linear interpolation with rapid traverse (m)
a2//G01/Linear interpolation with feed (m)
a2//G02/Circular interpolation in the clockwise direction (m)
...
Section [CONTEXT]
An increased context sensitivity of the Help function can be selected in the [CONTEXT]
section. This setting is activated with "1" and deactivated with "0" (is also entered under
"Settings").
If the increased context sensitivity is activated and the cursor is positioned to the left of, next
to or on an instruction text, then all instructions with the same initial letters are displayed
when Help is called.
For example, if the programmer has selected instruction "G1", then all instructions beginning
with "G1" (e.g. "G1", "G17", "G18", "G19") are displayed.
If increased context sensitivity has been deactivated with "0", then only the instruction
actually selected (if available) is displayed.
Section [TEXTSEARCH]
The text search type can be specified in the [TEXTSEARCH] section.
The following search methods can be parameterized:
1 = instruction texts only
2 = descriptive texts only
3 = instruction and descriptive texts (are also entered via "Search").
See also
IF.INI (Page 290)