Siemens SINUMERIK Скачать руководство пользователя страница 169

Страница: 169 / 736

Diagnostics and service

5.7 HMI Analyzer

HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0

163

5.7.3

Analyzing INI Files

System → Files

All entries of the analyzed INI files are displayed here.

HMI

Display of the corresponding INI entries from files that are subject to the

INI concept of HMI-Advanced. The directory from which the entry comes

is also displayed ("Source" column). For this, all the directories that are

entered under HMI_DIRS in HMIAnalyzer.ini are scanned.

Additional files Display of the addition INI files that are not subject to the INI concept, i.e.

these INI files are only searched for in the specified path.

System → Hardware Resources

Hardware

Under hardware, parts of the existing hardware are listed, e.g. information

on the processor and information on the individual hard disk partitions and

drives.

Memory

More precise information on the existing and available memory is

displayed here in KB:

Used Memory:

Percent of allocated memory

Physical Memory, total:

Total size of the RAM

Physical Memory, available:

Free, available RAM memory

Page File, total :

Total memory of the swap file

Page File, available:

Free, available memory of the swap file

Virtual Memory, total:

Total size of the virtual memory

Virtual Memory, available:

Free, available virtual memory

System → Software Environment

Running Tasks

The memory usage and the running of all active processes are

displayed here.

The following columns are displayed:

Name

Name of the process

Running

"X" process is running
'-' process was ended

ProcessID

Process ID

WorkingSetSize

Current memory usage in kB

DiffWorkingSetSize

Modification of the memory since the start of the HMI Analyzer or since

the last reset

Содержание SINUMERIK

































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK

Отзывы:

Похожие инструкции для SINUMERIK

Бренды по названию

Популярные бренды

Siemens SINUMERIK, Руководство по вводу в эксплуатацию

Результаты поиска

Содержание SINUMERIK

Отзывы:

Похожие инструкции для SINUMERIK

Бренды по названию

Популярные бренды