3 Setting up functions
08/2008
3.
3
Fault service
s
© Siemens AG 2008 All Rights Reserved
3-130
ePS Network Services, Function Manual (FH) - Release 08/2008
Field Content
Type
Delete
Deletes a file for uploading from the list.
ACTION
Add/change
In the line for editing, the complete path,
right up to the file to be uploaded with its
file type identifier, must be entered in
DOS syntax (but including special charac-
ters and with more than 8 characters).
Note:
The syntax shown below, which is differ-
ent, can be used for the purpose of up-
loading files from the NC file system:
../NC/Directory.dir/Subdirec-
tory.dir/ <File.Extension>
DISPLAY
INPUT
The system automatically determines the
current storage location of the file (hard
disk/NC SRAM) and the file is loaded from
there.
Description of "Upload HMI action log" function"
The current HMI action log file can be specifically uploaded to the ePS server with
the trigger event.
This action type has no configurable parameters.
In the column with the paper clip, the HMI action log file can be marked for sending
as an attachment for a notification of the workflow for this control monitor.
Description of the "Upload machine data" function
The diagnostic action "Upload machine data" enables uploading of the machine
data to the ePS server on an event.
This action type has no configurable parameters.
In the column with the paper clip, the machine data can be marked for sending as
an attachment for a notification of the workflow for this control monitor.
Note
The uploaded machine data do not contain any drive machine data.
Description of the "Upload NC state data" function
The diagnostic action "Upload NC status data" enables uploading of the NC status
data to the ePS server on an event.
This action type has no configurable parameters.
In the column with the paper clip, the NC status data can be marked for sending as
an attachment for a notification of the workflow for this control monitor.