08/2008
4 Organizational tasks
4.1 Maintenance
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 08/2008
4-161
Field Content
Type
Master data
Display your own data from the machine
master data. Where a job is concerned,
this may vary depending on the view used
for visualization: i.e. whether it is viewed
from the perspective of any given partner,
or, in the case of the maintenance job list,
your own point of view.
DISPLAY
Job no., job desig-
nation, date, due
status
Unique, consecutive numbers for mainte-
nance jobs, which are automatically gener-
ated by the system in order to avoid mis-
understandings in communication
Designation of the maintenance schedule,
which the user has allocated during con-
figuration
Execution time for the maintenance job,
calculated by the system according to the
basic settings configured by the user
DISPLAY
Status Indicates
the
status of the job. The status
can be changed by the user at this point.
Opening the job should indicate that the
maintenance procedures required in the
job have already been carried out.
Closing the maintenance job corresponds
to acknowledging it; here it can be deter-
mined whether the maintenance proce-
dures were performed successfully.
Important
:
Even when the display has a particular
status, it is not actually set to this. In each
case, the status must be confirmed with
"OK" in order for it to take effect and for the
display to be set to this. This can be moni-
tored by calling the maintenance job again.
SELECTION
Authors
Here, the system automatically enters the
user logged onto ePS Network Services
who has most recently opened the mainte-
nance job on the machine operator panel.
No display
Responsible org.
Not displayed, since the responsible or-
ganization would never inadvertently look
for the job on the machine
No display
Work instruction
Description of the maintenance procedures
to be performed. This field displays the
work instructions for the person performing
maintenance.
DISPLAY