manualshive.com logo in svg

Siemens SINAUT MD720-3, Системное руководство, Страница: 40 / 76

Поделиться
Скачать
Siemens SINAUT MD720-3 Скачать руководство пользователя страница 40

SINAUT MD720-3 in Terminal Mode 

 

SINAUT MD720-3 

40 

C79000-G8976-C211 

 

AT+CGDCONT Define PDP context 

Test

 

Command: 

AT+CGDCONT=?

 

Response: 

+CGDCONT: (range of supported <cid>s), <PDP_type>,,,(list of supported <d_comp>s), 
(list of supported <h_comp>s)[,(list of supported <pd1>s)[,…[,(list of supported 
<pdN>s)]]][...]] 
[+CGDCONT: (range of supported <cid>s), <PDP_type>,,,(list of supported <d_comp>s), 
(list of supported <h_comp>s)[,(list of supported <pd1>s)[,…[,(list of supported 
<pdN>s)]]][...]]] OK 

Read command

 

Command: 

AT+CGDCONT?

 

Response: 

If +CGDCONT is set: 
+CGDCONT: <cid>, <PDP_type>, <APN>,<PDP_addr>, <d_comp>, 
<h_comp>[,<pd1>[,…[,pdN]]] 
[+CGDCONT: <cid>, <PDP_type>, <APN>,<PDP_addr>, <data_comp>, 
<head_comp>[,<pd1>[,…[,pdN]]] OK  
If +CGDCONT is not set: 
OK 

Executive command

 

Command: 

+CGDCONT=<cid> ,<PDP_type> ,<APN> ,<PDP_addr> ,<d_comp> ,<h_comp> 

Response: OK 
Parameter: <cid>: 

 

(Local) 

context identification parameter 

<PDP_type>: 

Packet Data Protocol type 

A string parameter which specifies the type of packet data protocol. Only IP Internet 
Protocol - IETF STD 5) is supported. 
<APN>:   

Access Point Name 

A string parameter which is a logical name that is used to select the GGSN or the external 
packet data network. 
<PDP_address>:  
A string parameter that identifies the MT in the address space applicable to the PDP. As 
only IP is currently supported, it shall be an IP address. 
If the value is null (“0.0.0.0” or 0), then a value may be provided by the TE during the PDP 
startup procedure or, failing that, a dynamic address will be requested. 
The read form of the command will continue to return the null string even if an address 
has been allocated during the PDP startup procedure. The allocated address may be 
read using the +CGPADDR command. 
<d_comp>:  
A numeric parameter that controls PDP data compression. 
0: 

off  (default and only value supported) 

<h_comp>:  
A numeric parameter that controls PDP header compression 
0: 

off (default and only value supported) 

<pd1>, … <pdN>: 

 

Zero to N string parameters whose meanings are specific to the <PDP_type> 

 

Содержание SINAUT MD720-3













































































Отзывы:

Нет отзывов