manualshive.com logo in svg

Siemens SIMATIC NET SCALANCE S615, Руководство по настройке, Страница: 190 / 320

Поделиться
Скачать
Siemens SIMATIC NET SCALANCE S615 Скачать руководство пользователя страница 190

Description

The table has the following columns:
● Service

Shows which providers are supported.

● Enabled

When enabled, the device logs on to the DDNS server. 

● Host

Enter the host name that you have agreed with your DDNS provider for the device, e.g. 

example.no-ip-com.

● User Name

Enter the user name with which the device logs on to the DDNS server.

● Password

Enter the password assigned to the user.

● Password Confirmation

Confirm the password.

Procedure

Requirement: 
● User name and password that gives you the right to use the DDNS service.
● Registered hostname, e.g. example.no-ip.com
● UDP port 53 for DNS is enabled and is not used for NAT.
1. In "Host", enter the hostname that you have agreed with your DDNS provider for the device, 

e.g. example.no-ip-com.

2. Enter the login data (user name, password) for the DDNS server.
3. Select "Enabled".  This hostname is used for the device.
4. Click on "Set Values".

Configuring with Web Based Management
4.5 "System" menu

SCALANCE S615 Web Based Management

190

Configuration Manual, 11/2019, C79000-G8976-C388-08

Содержание SIMATIC NET SCALANCE S615

































































































































































































































































































































Отзывы:

Нет отзывов