manualshive.com logo in svg

Siemens SIMATIC NET SCALANCE S615, Руководство по настройке, Страница: 184 / 320

Поделиться
Скачать
Siemens SIMATIC NET SCALANCE S615 Скачать руководство пользователя страница 184

Description

● Status

Shows the status of the KEY-PLUG. The following are possible:
– ACCEPTED

There is a KEY-PLUG with a valid and matching license in the device.

– NOT ACCEPTED

The license of the inserted KEY-PLUG is not valid.

– NOT PRESENT

No KEY-PLUG is inserted in the device.

– MISSING

There is no KEY-PLUG inserted with the "FACTORY" status. Functions are configured 

on the device for which a license is required.

– WRONG

The inserted KEY-PLUG is not suitable for the device.

– UNKNOWN

Unknown content of the KEY-PLUG.

– DEFECTIVE

The content of the KEY-PLUG contains errors.

● Order ID

Shows the order ID of the KEY-PLUG. The KEY-PLUG is available for various functional 

enhancements and for various target systems.

● Serial Number

Shows the serial number of the KEY-PLUG.

● Info String

Shows additional information about the device that used the KEY-PLUG previously, for 

example, article number, type designation, and the versions of the hardware and software. 

The displayed software version corresponds to the version in which the configuration was 

last changed. With the "NOT ACCEPTED" status, further information on the cause of the 

problem is displayed. 

Note
When you save the configuration, the information about whether or not a KEY-PLUG was 

inserted in the device at the time is also saved. This configuration can then only work if a 

KEY-PLUG with the same order number / license is inserted.

Configuring with Web Based Management
4.5 "System" menu

SCALANCE S615 Web Based Management

184

Configuration Manual, 11/2019, C79000-G8976-C388-08

Содержание SIMATIC NET SCALANCE S615

































































































































































































































































































































Отзывы:

Нет отзывов