Siemens SICAM MMU 7KG9663 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 262

Siemens SICAM MMU 7KG9663 Скачать руководство пользователя страница 42

5 Getting Started

5.1 Unpacking, Inspecting the Delivery and Installing the Battery

42

SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

5.1

Unpacking, Inspecting the Delivery and Installing the Battery

Unpacking

SICAM MMU has been safely packed for transport in the factory. Unpack the device with care and do not use
force. Use an appropriate tool if necessary. After unpacking, inspect the device visually for any mechanical de-
fects.

Observe any additional notes enclosed with the packaging.

Keep the transport packaging for future transport.

Inspecting the Delivery

After unpacking, first compare the packing list against your original purchase order to check that the delivered
device has the desired rated data and functions and that all necessary and ordered accessories are enclosed.

Installing the Battery

If you want to operate the device immediately after the delivery, first insert the battery before beginning the in-
stallation. Upon delivery the battery is insulated in the battery compartment of the device.

If you want to operate the device later, insert the battery only just before you intend to use the device.

To insert the battery, observe the notes in the supplied Product Information E50417-B1050-C514 and proceed
as follows:

✧

Lever the cover of the battery compartment out of the socket with a suitable tool (e.g. precision engineer
screwdriver 2.0 mm).

Fig. 5-1

Top side of the SICAM MMU

NOTE

If the device has been damaged during transport, do not connect and operate it.

NOTE

The battery powers the battery-buffered memory (SRAM) and the real-time clock (RTC). But the device can
still be operated when no battery is inserted or when the battery is discharged. If, however, the supply voltage
is lost, all metered energy values and error reports are deleted and the real-time clock is reset (2000-01-01
00:00).

Customer-specific parameters are permanently stored in the Flash-EPROM even without a battery.

Cover of battery

Polarity of

the battery

compartment

SICAM-MMU_7KG9663_US.book Page 42 Monday, December 7, 2015 12:22 PM

«
...
40
41
42
43
44
...
»

Содержание SICAM MMU 7KG9663







































































































































































































































































Отзывы:

Нет отзывов