manualshive.com logo in svg

Siemens SICAM MMU 7KG9663, Руководство по эксплуатации устройства, Страница: 148 / 262

Поделиться
Скачать
Siemens SICAM MMU 7KG9663 Скачать руководство пользователя страница 148

9 Communication

9.1 Communication Feature

148

SICAM MMU 7KG9663, Device Manual

E50417-H1040-C514-A3, Edition 01.2016

Otherwise, the LEDs (see chapter 12.3) signal that the IP address is already assigned and the device is not 
connected to the network. In this case, you have to specify a different IP address.

Reception of the Network Configuration from the DHCP Server

The network configuration can also be obtained from an external server. Using the DHCP protocol, the device 
is integrated into an already existing network.

If the IP address 0.0.0.0 is configured (see chapter 7.3.4.2), the device sends a query to the external DHCP 
server requesting the network configuration immediately after booting. Having received the network configura-
tion, the device launches the Ethernet services.

If no DHCP server is available, you have to disconnect the device from the network and start it using the default 
IP address (see chapter 5.7.3) and assign a permanent IP address.

9.1.1.3

Ethernet Interface

SICAM MMU is equipped with an Ethernet interface. The data are exchanged via the RJ45 Ethernet plug con-
nector located on the top side of the device.

Fig. 9-2

RJ45 Ethernet Plug Connector

The Ethernet interface is characterized by the following parameters:

•

Transmission rate:

100 Mbit/s

•

Protocol:

IEEE802.3

•

Connection:

100Base-T (RJ45), pin assignment according to DIN EN 50173, automatic 

patch/crossover cable recognition

•

Connecting cable:

100 

Ω

 to 150 

Ω

 STP, CAT5 (shielded twisted-pair cable), max. 100 m if well 

installed

NOTE

If the device is directly connected to a PC (without Ethernet switch), the PC will need a longer period to be 
able to detect the connection and therefore to receive the ARP telegram. In this case it may not be detected 
when PC and device have the same IP address.

Ethernet
connector

RJ45

SICAM-MMU_7KG9663_US.book  Page 148  Monday, December 7, 2015  12:22 PM

Содержание SICAM MMU 7KG9663







































































































































































































































































Отзывы:

Нет отзывов