Siemens SENTRON ATC6300 Скачать руководство пользователя страница 25

Страница: 25 / 210

Product description

4.3 Description of the main menu

3KC ATC6300 transfer control device
Manual, 03/2018, L1V30535632002A-01

Description of the symbols

The symbols

are used as shortcuts, with which the display pages of the

measurements can be retrieved faster.
They enable a jump to be made directly to the selected group of messages. From there, it is

possible to scroll forward or back as usual.

Symbol

Meaning

Access point to the command menu in which the authorized user can execute certain resetting and

restoring processes. Grayed out if the password has not been entered.

Input of the numerical code that allows access to the protected functions (see chapter Password protec-

tion (Page 36)).

Access point for displaying the real-time values of the voltage between L-L.

Access point for displaying the real-time values of the voltage between L-N.

Access point for displaying the active alarms.

Access point for displaying the set thresholds relating to the triggering of a transfer (see chapter Param-

eterization (Page 115)).

Access point to the statistical operating data of the control device.

Access point for displaying the stored events of the ATC6300.

Access point for displaying the real-time values of the battery. If no additional DC supply / battery is

used, this window is grayed out.

Access point that enables the operator to view the status of the inputs and outputs used.

Access point for displaying the system information via the ATC6300.

Access point to the setup menu. Grayed out if there is password protection and the password has not

yet been entered.

Содержание SENTRON ATC6300



















































































































































































































Результаты поиска

Содержание SENTRON ATC6300

Отзывы:

Siemens SENTRON ATC6300, Руководство пользователя, Страница: 25 / 210

Результаты поиска

Содержание SENTRON ATC6300

Отзывы: