Siemens SCALANCE XM-400 Скачать руководство пользователя страница 814

Страница: 814 / 960

Security and authentication

11.1 User management

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

814

Configuration Manual, 06/2016, C79000-G8976-C252-11

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call up the command with the following parameters:

user-group <user-group-name> role <role-name> [description <user-group-description>]

The parameters have the following meaning:

Parameter

Description

Range of values / note

user-group

Keyword for a group name

user-group-name

Group name

Enter the name of the group. The name

must match the group on the RADIUS

server.
The name must meet the following condi-

tions:

•

It must be unique.

•

It must be between 1 and 64 charac-

ters long.

role

Keyword for the role name

role-name

Role name

Enter a role name. Users who are author-

ized with the linked group on the RADIUS

server receive the rights of this role local-

ly on the device.
You can choose between system-defined

and self-defined roles.

description

Keyword for the description

user-group-

description

Content of the description

Enter a description for the link. The de-

scription text can be up to 100 characters

long.

Result

The group is linked to a role.

Further notes

You delete a link with the

no user-group

command.

You show the created links with the

show user-groups

command.

Содержание SCALANCE XM-400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SCALANCE XM-400

Отзывы:

Siemens SCALANCE XM-400, Руководство по настройке, Страница: 814 / 960

Результаты поиска

Содержание SCALANCE XM-400

Отзывы: