Siemens SCALANCE XM-400 Скачать руководство пользователя страница 654

Страница: 654 / 960

Layer 3 functions

9.5 VRRPv3 (IPv4 / IPv6)

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

654

Configuration Manual, 06/2016, C79000-G8976-C252-11

Result

The selected interface is monitored.

Further notes

You delete an interface tracking with the

no interface interface

command.

You display the configured interface tracking with the

show vrrp track

command.

You assign a VRRP interface to an interface tracking with the

vrrp track decrement

command.
You configure the value by which the priority is reduced with the command

vrrp track

decrement

With the

track links

command you configure how many of the monitored interfaces need to

change their status before the priority of the assigned VRRP interface is changed.

9.5.4.4

no track interface

Description

With this command, you delete the tracking of interfaces.

Note
This command is available only with layer 3.

Requirement

You are in the VRRP Router configuration mode.
The command prompt is as follows:

cli(config-vrrp-v3)#

Syntax

Call up the command with the following parameters:

no track <group-index> interface { vlan <vlan-id (1-4094)> | <interface-type>
<interface-id> }

The parameters have the following meaning:

Parameter

Description

Range of values / note

group-index

ID of the interface tracking

vlan

Keyword for a VLAN connection

Содержание SCALANCE XM-400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SCALANCE XM-400

Отзывы:

Siemens SCALANCE XM-400, Руководство по настройке, Страница: 654 / 960

Результаты поиска

Содержание SCALANCE XM-400

Отзывы: