Siemens SCALANCE X302-7EEC Скачать руководство пользователя

Страница: 96 / 322

Description of the device

4.4 C-PLUG (configuration plug)

SCALANCE X-300

Operating Instructions, 05/2016, A5E01113043-20

Area of application

The C-PLUG is an exchangeable medium for storage of the configuration data of the IE

Switch and ships with the product. This means that the configuration data remains available

if the IE Switch is replaced.

How it works

Power is supplied by the IE Switch. The C-PLUG retains all data permanently when the

power is turned off.
If an empty C-PLUG (factory settings or deleted with the Clean function) is inserted, all the

configuration data of the IE Switch is saved to it automatically when the device starts up.

Changes to the configuration during operation without operator intervention are saved on the

C-PLUG if this is in the "ACCEPTED" status.
An IE Switch with an accepted C-PLUG inserted uses the configuration data of the C-PLUG

automatically when it starts up. Acceptance is possible only when the data was written by a

compatible device type.
This allows an IE Switch to be replaced quickly and simply. The C-PLUG is taken from the

failed component and inserted in the replacement. The first time it is started up, the

replacement device has the same configuration as the failed device except for the MAC

address set by the vendor.

Diagnostics

Inserting a C-PLUG that does not contain the configuration of a compatible device type,

accidentally removing the C-PLUG or general malfunctions of the C-PLUG are signaled by

the diagnostics mechanisms of the IE Switch (LEDs, WEB-based management, SNMP, CLI

and PROFINET diagnostics).

Содержание SCALANCE X302-7EEC



































































































































































































































































































































Результаты поиска

Содержание SCALANCE X302-7EEC

Отзывы:

Похожие инструкции для SCALANCE X302-7EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE X302-7EEC, Руководство по эксплуатации

Результаты поиска

Содержание SCALANCE X302-7EEC

Отзывы:

Похожие инструкции для SCALANCE X302-7EEC

Бренды по названию

Популярные бренды