Siemens SCALANCE X302-7EEC Скачать руководство пользователя

Страница: 22 / 322

Safety instructions

1.4 Security recommendations

SCALANCE X-300

Operating Instructions, 05/2016, A5E01113043-20

●

Use secure protocols when access to the device is not prevented by physical protection

measures.

●

To prevent unauthorized access to the device or network, take suitable protective

measures against non-secure protocols.

●

If you require non-secure protocols and services, operate the device only within a

protected network area.

●

Restrict the services and protocols available to the outside to a minimum.

●

For the DCP function, enable the "DCP read-only" mode after commissioning.

Available protocols per port

The following list provides you with an overview of the open ports on this device. Keep this in

mind when configuring a firewall.
The table includes the following columns:

●

Protocol
All protocols that the device supports

●

Port number
Port number assigned to the protocol

●

Port status
–

Open
The port is always open and cannot be closed.

–

Open (when configured)
The port is open if it has been configured.

Note
With some protocols the port may be open although the corresponding protocol is

disabled, for example TFTP.

●

Default status of the port
–

Open
As default the port is open.

–

Closed
As default the port is closed.

●

Authentication
Specifies whether or not the protocol is authenticated during access.

Содержание SCALANCE X302-7EEC



































































































































































































































































































































Результаты поиска

Содержание SCALANCE X302-7EEC

Отзывы:

Похожие инструкции для SCALANCE X302-7EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE X302-7EEC, Руководство по эксплуатации

Результаты поиска

Содержание SCALANCE X302-7EEC

Отзывы:

Похожие инструкции для SCALANCE X302-7EEC

Бренды по названию

Популярные бренды