Siemens SCALANCE X302-7EEC Скачать руководство пользователя

Страница: 19 / 322

Safety instructions

1.4 Security recommendations

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

Safety requirements for installation
According to the IEC 61131-2 standard and therefore in accordance with the EU directive

2006/95/EC (Low Voltage Directive), the devices are "open equipment" and in accordance

with UL/CSA certification, they are an "open type".
To fulfill requirements for safe operation with regard to mechanical stability, flame

retardation, stability, and shock-hazard protection, the following alternative types of

installation are specified:

●

Installation in a suitable cabinet.

●

Installation in a suitable enclosure.

●

Installation in a suitably equipped, enclosed control room.

1.4

Security recommendations

To prevent unauthorized access, note the following security recommendations.

General

●

You should make regular checks to make sure that the device meets these

recommendations and/or other security guidelines.

●

Evaluate your plant as a whole in terms of security. Use a cell protection concept with

suitable products.

●

When confidential zones are used, the internal and external network are disconnected, an

attacker cannot access the data from the outside.

●

Operate the device only within a protected network area.

●

Use VPN to encrypt and authenticate communication from and to the devices.

●

For data transmission via a non-secure network use an encrypted VPN tunnel (IPsec).

●

For operation of the device in a non-secure infrastructure no product liability will be

accepted.

●

Separate connections correctly (WBM. Telnet, SSH etc.).

Physical access

●

Limit physical access to the device to qualified personnel.

The memory card or the C-PLUG contains sensitive data such as certificates, keys etc.

that can be read out and modified.

●

Lock unused physical ports on the device. Unused ports can be used to gain forbidden

access to the plant.

Содержание SCALANCE X302-7EEC



































































































































































































































































































































Результаты поиска

Содержание SCALANCE X302-7EEC

Отзывы:

Похожие инструкции для SCALANCE X302-7EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE X302-7EEC, Руководство по эксплуатации

Результаты поиска

Содержание SCALANCE X302-7EEC

Отзывы:

Похожие инструкции для SCALANCE X302-7EEC

Бренды по названию

Популярные бренды