Siemens PCS 7, Руководство по установке

Страница: 74 / 156

Rules for the installation and use of PCS 7 and other software
Note
Only the software products listed in this manual should be installed on a PCS 7 PC. This applies
in particular to PC stations used for process mode (OS, BATCH, Route Control).
Installing and simultaneously activating applications that are not approved by Siemens can
adversely impact the PCS 7 system performance.
The user bears sole responsibility when third-party products are used.
If you nevertheless need to use third-party products, they should be installed before you install
PCS 7. PCS 7 and these third-party products should not run at the same time.
Several PCS 7 applications on a single PC station
A PC station can not only be used to run a single PCS 7 application (such as OS server) with
PCS 7, it can also be used to run several PCS 7 applications (such as OS server and BATCH
client). You can find additional information on this in the appendix "Approved configurations
(Page 142)".
Installing the Microsoft SQL Server for PCS 7
The Microsoft SQL Server is required in PCS 7 for the specific PC stations: for example,
operator station, engineering station.
As of PCS 7 V7.1, the installation is performed within the PCS 7 system setup and is
automatically selected when required by the configuration to be installed for the PC station.
You can find additional information on this in the section "Setting up user groups and users
(Page 82)".
Using Microsoft Office
You can find information about this in the section "How to install additional components
(Page 71)".
Security settings
Settings are required in the registry, in DCOM and in the Windows firewall exception list for
trouble-free operation of the PCS 7 software.
Installing PC stations
5.4 Installing the PCS 7 software
PCS 7 - PC Configuration (V8.2)
74
Installation Manual, 03/2016, A5E36200050-AB