Siemens PCS 7, Руководство по установке

Страница: 130 / 156

● The user must be member of the appropriate "HMI group" of the target computer (see
section "Setting up user groups and users (Page 82)"). A maximum of 1 user is permitted
per target computer.
● Actions via RDP:
– Hot restart/restart of the PC with corresponding logon
– Setting up/configuration of computer
Note
Non-supported functions
The following actions are not supported via RDP:
● Operator control and monitoring process mode
● Multiple logons to the operating system
● Access to computers via RDP should only be temporary and not static.
Note
PCS 7 Web client
The above restrictions do not apply when using a PCS 7 Web client as terminal service.
Additional information
● Section "Subsequent installation or updating (Page 88)"
● White paper
Process Control System PCS 7; Security Concept PCS 7 and WinCC - Basic
Document
You can find information on availability in the
Process Control System PCS 7;
PCS 7‑ Readme (see "Preface (Page 9)").
● Operating system online help
5.8.3 Automatic logon to the operating system
A PC station with password protection is enabled by default after the operating system starts
in the logged out state.
If a PC station should go immediately to the state for logon of the operator or to process mode
after startup, the logon procedure must run automatically on the operating system. This is
permitted in PCS 7.
Installing PC stations
5.8 Notes on add-ons and utilities
PCS 7 - PC Configuration (V8.2)
130
Installation Manual, 03/2016, A5E36200050-AB