Siemens PCS 7, Руководство по установке

Страница: 126 / 156

4. In the "Optional connection to redundant partner" area, configure the connection path.
For a serial connection:
– Select the item "COM1" or "COM2" " " in the "Serial port" drop-down list.
– Select the "-----------------" item in the "Network adapter" drop-down list.
For connection via an additional network adapter:
– Select the "-----------------" item in the "Serial port" drop-down list.
– Select the desired network adapter in the "Network adapter" drop-down list.
5. Click "OK".
Additional steps for servers and single station systems (OS, BATCH)
After connecting the PC stations with a redundancy cable and selecting the redundancy
interface:
1. Follow the instructions in the function manual
Process Control System PCS 7; Fault-
Tolerant Process Control Systems.
Additional steps for clients (OS, BATCH)
Connect the clients with the redundant servers:
1. Follow the instructions in the function manual
Process Control System PCS 7; Fault-
Tolerant Process Control Systems.
Additional steps for SIMATIC Route Control
1. Follow the corresponding instructions contained in the manual
Process Control System
PCS 7; SIMATIC Route Control.
See also
How to set the communication module for connecting to the terminal bus (Page 107)
5.7.18 How to disable user switching
Introduction
For PCS 7, the use of the Windows functionality "Fast user switching" is not permitted for
changing the Windows user.
Installing PC stations
5.7 Preparing PC stations
PCS 7 - PC Configuration (V8.2)
126
Installation Manual, 03/2016, A5E36200050-AB