Siemens 8DJH Скачать руководство пользователя

Страница: 140 / 174

9 | Operation

140/174

8DJH • Installation and Operating Instructions • Version 11 • 500-8384.9

3. Push the locking device upwards, and hold it.

✓ The actuating opening of the switch-disconnector is open.

4. Insert the operating lever and turn straight clockwise as far as it

will go.

✓ The position indicator of the switch-disconnector shows the

CLOSED position.

5. Remove the operating lever.

✓ The locking device returns to its initial position.

6. Fit the padlock (optional) on the locking device at the desired

position [

▶

Page 137, "Mechanical interlocking with padlock"].

✓

The feeder is connected to the busbar.

9.4.2 Switching the three-position switch-disconnector from CLOSED to OPEN

position

☒ Three-position switch-disconnector in CLOSED position
1. Check service readiness [

▶

Page 135, "Ready-for-service

indicator"].

2. Remove the padlock from the locking device (optional).

3. Push the locking device upwards, and hold it.

✓ The actuating opening of the switch-disconnector is open.

4. Insert the operating lever and turn straight counter-clockwise as

far as it will go.

✓ The position indicator of the switch-disconnector shows the

OPEN position.

5. Remove the operating lever. The locking device returns to its

initial position.

6. Fit the padlock (optional) on the locking device at the desired

position [

▶

Page 137, "Mechanical interlocking with padlock"].

✓

The feeder is disconnected from the busbar.

Содержание 8DJH















































































































































































Результаты поиска

Содержание 8DJH

Отзывы:

Похожие инструкции для 8DJH

Бренды по названию

Популярные бренды

Siemens 8DJH, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 8DJH

Отзывы:

Похожие инструкции для 8DJH

Бренды по названию

Популярные бренды