SICK Flexi Loop Скачать руководство пользователя страница 65

Страница: 65 / 104

•

If there is no shutdown and no error has occurred on any of the Flexi Loop nodes,
the event is

not present

•

If there has been a shutdown or an error has occurred on one of the sensors or
switches, then the event is

present

Synchronization safety controller

The event 6145 (1801h)

Synchronization safety controller

indicates whether a safety con‐

troller has been found.

•

If a safety controller has been detected, then the event is

not present

•

If the connection to a safety controller is interrupted, then the event is

present

Flexi Loop not in operation

The event 6152 (1808h)

Flexi Loop not in operation

indicates whether the communication

within the safe sensor cascade is active.

•

If the communication in the safe sensor cascade is running, then the event is

not

present

•

If the communication in the safe sensor cascade is interrupted, then the event is

present

Cable connection

The event 6153 (1809h)

Cable problem detected

indicates that the internal cable monitor‐

ing has detected a problem with the cabling for the safe sensor cascade.

•

If the safe sensor cascade is correctly wired and terminated with a terminator,
then the event is

not present

•

If the cabling for the safe sensor cascade is interrupted or not terminated with a
terminator, then the event is

present

Dynamic error

The event 6146 (1802h)

Dynamic testing failed

indicates whether the dynamic testing of

the safety sensors and safety switches connected was free of errors.

•

If the dynamic testing on all the safe sensors and safety switches connected to the
Flexi Loop nodes was successful, then the event is

not present

•

If a dynamic error has occurred on one of the sensors or switches, then the event
is

present

Static error

The event 6147 (1803h)

Static testing failed

indicates whether the static testing of the

safety sensors and safety switches connected was free of errors.

•

If the static testing on all the safety sensors and safety switches connected to the
Flexi Loop nodes was successful, then the event is

not present

•

If a static error has occurred on one of the sensors or switches, then the event is

present

Critical error

The event 6148 (1804h)

Critical error (hardware)

indicates whether damage has been

detected on the hardware in the safe sensor cascade or the MSTR Flexi Loop accessory
(damaged Flexi Loop nodes, short-circuits on connection cables, faulty safety switches
or safety sensors etc.).

•

If the status of all hardware components in the safe sensor cascade is free of
faults, then the event is

not present

•

If a fault has been detected in the hardware in the safe sensor cascade, then the
event is

present

CONFIGURATION

8015836/YT10/2016-05-24 | SICK

O P E R A T I N G I N S T R U C T I O N S | Flexi Loop

Subject to change without notice

Содержание Flexi Loop









































































































Результаты поиска

Содержание Flexi Loop

Отзывы:

Похожие инструкции для Flexi Loop

Бренды по названию

Популярные бренды

SICK Flexi Loop, Руководство по эксплуатации

Результаты поиска

Содержание Flexi Loop

Отзывы:

Похожие инструкции для Flexi Loop

Бренды по названию

Популярные бренды