siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 8 / 104

Safety information
IDM 510-004-5
6
English language Operation and maintenance manual
– The packs being shipped must be properly fastened to the means of transport in
order to ensure safe conditions during transfer and the integrity of their contents.
– During some handling phases, the support of one or more operators may be re-
quired; these operators must be trained and informed about the tasks assigned
to them.
– Download packages in the immediate vicinity of the machine setting, which must
be sheltered from bad weather.
– Do not stack the packs onto each other in order to avoid any damage and to avoid
the risk of sudden and dangerous movements.
– In case of prolonged storage, regularly check that the component stocking condi-
tions do not change.
– The installation area is to be prepared so as to be able to carry out the operations
as specified in the manuals and in conditions of safety.
– Ensure that the installation environment is protected against atmospheric agents,
free of corrosive substances and free of any risk of explosion and/or fire.
– Signal and delimit the installation area in a proper way in order to prevent non
authorised personnel from accessing the installation area.
– The connections to the power sources (electric, pneumatic, etc.) must be per-
formed correctly, as shown in the diagrams and in compliance with the regulatory
and legal requirements in force.
– ONLY qualified and experienced personnel are allowed to carry out the electrical
connections.
– After completing the connections, perform a general check to ensure that all the
interventions have been carried out properly and that the requirements have
been met.
– The installation manager, before commissioning, must check that all the safety
devices are properly installed and functioning.
– At the end of operations check that there are no other tools or other material near
the moving parts or in dangerous areas.
– Dispose of all packing in accordance with the laws in force in the country of instal-
lation.
– The non-compliance with the information provided herein may lead to risks
for the safety and health of the persons involved and may also lead to eco-
nomic damages.
Safety Warnings for Operation and Use
– The machine must be used by one single operator ONLY, who must be trained
and capable of performing the work and be in suitable conditions.
– Consult the user manual, in particular during the first use, and make sure that you
fully understand its content.
– Find out the position and function of the controls and simulate some operations
(in particular start and stop) in order to acquire familiarity.
– The machine shall be used ONLY for the purposes and complying with the proce-
dures specified by the Manufacturer.
– Make sure that all the safety devices are properly installed and efficient.
– The machine should be used ONLY with the original safety devices installed by
the Manufacturer.