siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 19 / 104

IDM 510-129-1
Technical Specifications
17
English language Operation and maintenance manual
Cycle
The figure shows the operating cycle and indicates the main operating areas.
Stage
Ê
– Correctly load the new product to be wrapped in the middle of rotating platform.
– Tie the trailing end of the film to the base of the product to be wrapped.
Stage
Ë
– Start the wrapping cycle that will be performed based on the previously set pa-
rameters.
– Manual wrapping: start the platform and keep the special control pressed to
start the wrapping process.
– Release control when wrapping has reached the desired height.
– Automatic wrapping: set up the desired parameters and press the special con-
trol to start the cycle.
– The machine carries out wrapping and at the end of the set-up cycle it stops au-
tomatically.
Stage
Ì
– Manually cut the film and cause it to adhere to the wrapped product.
– Remove the wrapped product to be able to load the next one to wrap.
– The machine is ready for a new wrapping cycle.