siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 91 / 104

IDM 510-140-0
Control system
89
English language Operation and maintenance manual
– Press and hold button L to move reel holder carriage to the low position.
▀
Upper reinforcing band with reel holder carriage descent (dou-
ble wrapping)
– Release button H when the reel holder carriage reaches the upper part of the
product.
– Press and hold button L when the upper reinforcement band has been complet-
ed.
– Release button L to perform the intermediate reinforcement band.
– Press and hold button L and release it when the upper reinforcement band has
been completed.
– Press key C .
– Rotating platform stops in phase.
– Manually cut the film and cause it to adhere to the wrapped product.
10. Remove the wrapped product.
11. Correctly load the new product to be wrapped in the middle of rotating platform.
12. Wrap the new product by following the same procedures.
Important
Keep the reel suitably refilled to prevent to avoid interrupting the wrapping
due to absence of film.
▀
Normal stop
– Manually cut the film and cause it to adhere to the wrapped product.
– Press and hold button L to move reel holder carriage to the low position.
– Remove the wrapped product.
– Rotate electric selector G to position “O” (OFF).