siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 92 / 104

Control system
IDM 510-140-0
90
English language Operation and maintenance manual
(Single or double) automatic wrapping
The figure shows the points of intervention and the description shows the
procedures to be adopted.
1. Check whether the wrapping film has the same chemi-
cal-physical properties as that installed in the reel holder
carriage.
– If film characteristics appear to be different, consider wheth-
er you should adjust the film tension.
2. Rotate main disconnector G to position “I” (ON) to activate
the power supply.
– The pilot light of button F turns on.
3. Press the push-button F .
– The pilot light of button
F
turns off.
4. Correctly load the new product to be wrapped in the middle
of rotating platform.
Important
Remove the lifting device.
5. Tie the trailing end of the film to the base of the product to be
wrapped.
6. Select and activate the recipe of interest.
See “Recipe management” for further details.
7. Touch the icon M to programme the thickness of the film
(only for reel holding carriage of type PW - DM).
8. Touch the icon N to programme the perimeter of the load to be wrapped (only for
reel holding carriage of type PW - DM).
Important
To prevent the correct operation from being compromised, programme the
values in a thorough way.
9. Press button B to start the wrapping cycle.
– If the LED of key D is flashing, press key D to move reel holding carriage to its
end-of-cycle position.
– When reel holding carriage is timed, the LED of key D turns off.
– To restart the wrapping cycle, press key B again.
– Audible warning device is activated to warn that the machine is operating.
– The machine stops as previously described, based on the selected type of wrap-
ping.
Press button C to stop wrapping; press button B to continue.
Wrapping will start at the point where it has been stopped.
– Single mode: the wrapping stops automatically with the reel holder carriage at
the upper side of the load.
Press button D to move reel holder carriage to the start of the cycle (lower part).