siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 52 / 104

Reel holding carriage (M)
IDM 510-129-1
50
English language Operation and maintenance manual
▀
Cleaning and replacement of brake disc
– The operation must be carried out by the maintenance technician or by
personnel with suitable competences, skills and knowledge.
– Make sure to fulfil the required requirements in order to work under safe
conditions.
– This service should be carried out with the reel holding carriage lowered
and the machine safely at a stop.
1. Lift the lever A to its vertical po-
sition.
2. Remove the fastening ele-
ments and remove the lever.
3. Remove in a sequence the
components
B-C-D-E .
4. Clean the contact surfaces of
the brake discs
E-F .
5.
Check the wear level of the fric-
tion material of the disc
E .
– In the case of excessive wear,
replace the component.
6. Install the disc E with the fric-
tion material facing downwards.
7. Install in a sequence the com-
ponents
D-C-B .
8. Engage the lever A in a vertical
position and insert the fasten-
ing elements.
9. Lower the lever to its horizontal
position.
– At the end of operations,
check that there are no tools
or other material near the
moving parts or in danger-
ous areas.
10. Start the machine and make
sure that the operation has
been carried out properly.