siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 43 / 104

IDM 510-129-1
Maintenance
41
English language Operation and maintenance manual
Replacing the lifting belt of the carriage
The operation must be carried out by the maintenance technician or by per-
sonnel with suitable competences, skills and knowledge.
Make sure to fulfil the required requirements in order to work under safe con-
ditions.
– This service should be carried
out with the reel holding car-
riage lowered and the machine
safely at a stop.
– The figure shows the points of
intervention and the description
shows the procedures to be
adopted.
1. Mark the intervention area and
prevent access to the devices
that, if activated, may cause
unexpected hazards and jeop-
ardize the safety level.
Attention
Warning
Always wear suitable personal
protective equipment in order to
avoid safety and health hazards.
2. Rotate main disconnector to
position
“O” (OFF) to deacti-
vate the power supply.
3. To reach high, not easily acces-
sible or otherwise hazardous
areas, implement adequate
safety measures to avoid risks.
4. Disassemble the pressing roller
(See “Disassembly and re-as-
sembly of the Pressing Roller”).
5. Disassemble the reel holding
carriage (See “Disassembly
and re-assembly of the reel
holding carriage”).
Important
Only for reel holding carriages
of type PW
1°
6.
Remove the fastening elements
A
and remove the component
B
.
2°
7.
Attach the column
C
to a lifting device.
3°
8.
Remove the guard
W
.
9. Loosen the screws D .
4°
10. Bring the column to a horizontal position.
– Insert the shim E under the column to keep it horizontal.