siat ProWrap 16_H_FM, Руководство по эксплуатации и обслуживанию

Страница: 53 / 104

IDM 510-129-1
Reel holding carriage (M)
51
English language Operation and maintenance manual
▀
Replacing the outer surface of roller
– The operation must be carried out by the maintenance technician or by
personnel with suitable competences, skills and knowledge.
– Make sure to fulfil the required requirements in order to work under safe
conditions.
– This service should be carried out with the reel holding carriage lowered
and the machine safely at a stop.
1. Lift the lever A to its vertical po-
sition.
2. Remove the fastening ele-
ments and remove the lever.
3. Remove in a sequence the
components
B-C-D .
4. Remove the component F .
5. Unscrew screw G .
6. Unscrew the nuts H .
7.
Remove the plate
L
.
8. Remove stop ring M .
9. Remove the component N .
10. Remove all the external cylin-
der surface inserts
P , one at a
time.
11.
Thoroughly clean the grooves
of the roller.
12. Insert in a sequence, one at a
time, all the new external cylin-
der surface inserts.
13.
Install component
N
.
14. Reinstall the retainer ring M .
15. Fit back the plate L and fix it
with the nuts H without tighten-
ing.
16. Insert screw G and tighten it.
17.
Adjust the position of the plate
L and tighten the nuts H .
18.
Install component
F
.
19. Install in a sequence the com-
ponents
D-C-B .
20. Engage the lever A in a vertical position and insert the fastening elements.
21.
Lower the lever to its horizontal position.
– At the end of operations, check that there are no tools or other material
near the moving parts or in dangerous areas.
22. Start the machine and make sure that the operation has been carried out proper-
ly.