Shimadzu MOC-120H, Инструкция по эксплуатации

Страница: 59 / 76

47
13. Temperature Calibration (Option required)
Temperature calibration can be performed with the optional temperature calibration kit. The
calibration record meeting with GLP/GMP/ISO requirements can be automatically produced
with the optional printer.
The environmental conditions such as ambient temperature and air movement affect temperature calibration.
Perform temperature calibration without surrounding air movement and under the same conditions as when
performing measurements.
Press the
TARE/RESET
key to discontinue a once started temperature calibration. "Abort" is displayed and it returns to
the weight display.
For the operation of digital thermometer of temperature calibration kit, refer to its instruction manual.
Installation of Temperature Calibration Kit (Option)
1
Assembling temperature calibration kit:
Insert the sensor probe into the brackets on the
holder as shown in the figure.
Place the end of sensor probe in the bracket in
holder’s center.
2
Open heater cover and place the temperature
calibration kit over the sample pan as shown in the
figure.
(Fit the hole of holder to stay of main unit as shown in
the figure.)
3
Confirm heater cover is completely closed and sensor
probe is fitting in the notch of heater cover.
Stay
Hole
Notch
Caution
Do not touch heater cover and the sensor probe or holder of temperature calibration kit during
temperature calibration as they become very hot. Touching these parts may cause serious burning.
Sensor probe
Brackets
Holder
SALES & TECHNICAL SUPPORT
QAQC LAB www.qclabequipment.com TEL (804) 318-3686