Shimadzu MOC-120H, Инструкция по эксплуатации

Страница: 50 / 76

38
9-2-7 Specifying a password
In order to prevent the specified measuring conditions from being modified unexpectedly, a pass-
word may be specified to prevent other users from changing the specified conditions. The pass-
word is 4 characters in length and may be set using the following characters: digits from 0 to 9,
letters from A to Z, and hyphen.
If any password other than the default password of ‘0000’ is set, then whenever the
CONDITION
key is
pressed to specify measuring conditions ‘PASS’ is displayed and the user is required to enter the
password.
How to specify a password
Display Key(s) used Operating instructions
From the weight display, press the
ENTER
key and hold the
ENTER
key
down while pressing the
MENU
key.
The default password of ‘0000’ will be displayed with the first
character of the password flashing. The indicator ‘SEt’ will be
displayed in the weight display area.
Press the key or key to select the desired character (i.e., a
digit from 0 to 9, a letter from A to Z, or a hyphen). Note that here
the letter ‘1’ has been selected.
When the desired character is displayed, press the
ENTER
key. The
first character will be set and the second character will flash.
Repeat steps
3
and
4
until the fourth character has been
specified. Note that here a value of ‘1234’ has been specified.
When the fourth character has been specified, press the
ENTER
key.
The display will then return to the regular weight display.
Step
1
2
3
4
5
6
To delete or modify an existing password, press the
ENTER
key and
hold the
ENTER
key down while pressing the
MENU
key from the weight
display. The indicator ‘PASS’ will be displayed in the weight
display area and the first character of the default password ‘0000’
will begin to flash. Repeat steps
3
and
4
until you have entered
the current password.
When the 4-character password has been entered, press the
ENTER
key. The indicator ‘SEt’ will be displayed in the weight display
area. The value ‘0000’ will be displayed in the password area with
the first character flashing; repeat steps
3
to
6
to specify a new
password.
To delete a password, enter ‘0000’ as the new password.
7
8
MENU
ENTER
ENTER
ENTER
MENU
ENTER
ENTER
[Deleting or modifying an existing password]
SALES & TECHNICAL SUPPORT
QAQC LAB www.qclabequipment.com TEL (804) 318-3686