Shimadzu MOC-120H, Инструкция по эксплуатации

Страница: 4 / 76

Declaration of Conformity
Manufacturer’s Name: SHIMADZU CORPORATION
Analytical & Measuring Instruments Division
Address : 1,
Nishinokyo-Kuwabara-cho, Nakagyo-ku,
Kyoto 604-8511, Japan
declares in sole responsibility that the following product
Product Name Electronic Moisture Balance
Model Name MOC-120H
P/N 321-63300-10
referred to in this declaration conforms with following directives and standards
Electromagnetic Compatibility 2004/108/EEC
EN61326-1:2006
Electrical equipment for measurement, control and laboratory use
EMC requirements
Low Voltage Directive 2006/95/EC
EN 61010-1:2001
Safety requirements for electrical equipment for measurement,
control and laboratory use
Part 1 : General requirements
The last two digits of the year in which CE marking was affixed for Low Voltage
Directive 2006/95/EC are 03.
Note 1) This declaration becomes invalid if technical or operational modifications are
introduced without manufacturer
’ s consent.
Note 2) This declaration is valid if this product is used alone or in combination with the
accessories of this product which are mentioned in attached Appendix 1 or
other instruments which fulfill with the requirement of mentioned directive.
Note3) Importer/Distributor and Authorised Representative in EU is as follows:
SHIMADZU EUROPA GmbH
Address :Albert-Hahn-Strasse 6-10, 47269 Duisburg, F.R. Germany
Quality Assurance Department
Analytical & Measuring Instruments Division
SHIMADZU CORPORATION
II
SALES & TECHNICAL SUPPORT
QAQC LAB www.qclabequipment.com TEL (804) 318-3686