shelolab SMO5HP-2, Руководство по эксплуатации и установке

Страница: 13 / 42

13 | P a g e
INSTALLATION
H
ARDWIRE
R
EQUIREMENT
The oven requires permanent connect wiring (commonly known as hardwiring). Wiring to the power
source must be performed by a qualified electrical technician. All other Installation steps may be
performed by the end user.
I
NSTALLATION
P
ROCEDURE
C
HECKLIST
Perform the procedures and steps listed below to install the oven in a new workspace location and
prepare it for use. All procedures are found in the Installation section of this manual.
Pre-Installation
 Check that the required ambient condition for the oven are met, page 14
 Check that the spacing clearance requirements are met, page 14
•
Unit dimensions may be found on page 34
 Check for performance-disrupting heat and cold sources in the environment, page 14
 Check that a suitable permanent connect electrical power supply is present, page 15
Install the Oven in a suitable workspace location

Review the lifting and handling instructions, page 16
 Install the oven in its workspace location, page 17
 Make sure the oven is level, page 16
Set up the Oven for use

Clean the oven chamber and shelving if needed, page 17

Install the shelving in the oven chamber, page 17