shelolab SMO5HP-2, Руководство по эксплуатации и установке

Страница: 17 / 42

17 | P a g e
INSTALLATION
I
NSTALL THE
O
VEN
Place the unit in a workspace location that meets the criteria discussed in the previous entries of the
Installation section.
•
Verify that the oven stands level and does not rock. Adjust the leveling feet as needed.
•
Power : The oven may now be hardwired to its power source
I
NSTALLATION
C
LEANING
The unit was cleaned at the factory but may have been exposed to contaminants en route during
shipping.
•
Remove all wrappings and coverings from shelving prior to cleaning and installation.
•
Do not clean with deionized water.
•
See the Cleaning and Disinfecting topic in the User Maintenance section (see page 31) for
more information on how to clean the oven chamber prior to putting the unit into operation.
I
NSTALL THE
S
HELVING
The horizontal airflow moves from to left in the oven chamber. Place the shelves so they do not
obstruct the air duct holes on the left or right in order to maximize airflow across the shelf space.
1. Install shelf slide hangers on opposites sides of the oven by inserting the tabs of each slider
into the chamber’s mounting slots, then pushing down gently to secure the slider.
2. Hang the shelf from the two installed sliders.