manualshive.com logo in svg

Sharp MX-M503N, Руководство по эксплуатации, Страница: 792 / 806

Поделиться
Скачать
Sharp MX-M503N Скачать руководство пользователя страница 792

8-32

TROUBLESHOOTING

Contents

PROBLEMS RELATED TO SCAN RESULTS

Problem

Point to check

Solution

The scanned image is 
clipped.

Is the original scan size setting smaller 
than the actual original size?

Set the scan size to the actual original size.
If you have intentionally set a smaller size than the 
actual original size, note carefully the placement 
position of the selected scan size when placing the 
original. For example, when scanning an 
A4 (8-1/2" x 11") original using a B5 (5-1/2" x 8-1/2") 
setting on the document glass, align the original using 
the document glass scale at the left edge to fit the area 
you wish to scan into the B5 (5-1/2" x 8-1/2") scanning 
area.

☞

1. BEFORE USING THE MACHINE "

PLACING 

THE ORIGINAL ON THE DOCUMENT GLASS

" 

(page 1-40)

The quality of the 
scanned image is 
poor.

Is the original printed matter such as a 
book or magazine?

When the original is printed matter, vertical patterns 
(moiré) may occur. Touch the [Exposure] key in the base 
screen to open the exposure setting screen. The [Moiré 
Reduction] checkbox appears in this screen. This 
checkbox can be selected 

 to reduce the moiré 

effect. (only in scan mode and USB memory scan mode) 
It may also be possible to reduce the moiré effect by 
changing the resolution setting or shifting the original (or 
changing its angle) slightly on the document glass.

When scanning a colour or greyscale 
original, is the colour mode set to 
"Mono2"?

Setting the colour mode to "Mono2" replaces the colours 
in the original with either black or white. This is suitable 
for text-only documents. To scan a document that 
includes illustrations or other images, set the colour 
mode to [Greyscale] or [Full Colour].

Is a destination included that has 
[TIFF-S] selected for the format?

When a broadcast transmission is performed that 
includes both scan mode destinations and Internet fax 
destinations that have [TIFF-S] selected for the format, 
the resolution will remain fixed at [200X200dpi] even if a 
different resolution setting is selected. If you wish to 
send an image scanned at high resolution to scan mode 
destinations, send the image in a separate 
transmission.

The scanned image is 
blank.

Is the original placed face up or face 
down correctly?

When using the document glass, the original must be 
placed face down. When using the automatic document 
feeder, the original must be placed face up.

The scanned image is 
upside down or on its 
side.

Are Internet fax addresses included in 
the transmission?

When both scan mode and Internet fax destinations are 
included in a broadcast transmission, the original 
transmission orientation of Internet fax takes 
precedence, and thus the file may not appear in the 
correct orientation when viewed on a computer. In this 
event, send the image to the scan mode destinations in 
a separate transmission.

The scanned image is 
black and white.

Are Internet fax or fax destinations 
included?

If Internet fax or fax destinations are included, scanning 
will only take place in black and white.

Содержание MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов