manualshive.com logo in svg

Sharp MX-M503N, Руководство по эксплуатации, Страница: 764 / 806

Поделиться
Скачать
Sharp MX-M503N Скачать руководство пользователя страница 764

8-4

TROUBLESHOOTING

Contents

(3) Original misfeed

Open the document feeder 
cover and remove the misfed 
originals.

Pull out the document feeder 
tray and remove the misfed 
paper.

Open the automatic 
document feeder. Rotate the 
transfer roller in the direction 
of the arrow and remove the 
original.
(If you cannot remove the 
original, rotate the transfer 
roller in the reverse 
direction.)

(4) Paper misfeed in the paper pass unit

Pull out the paper pass unit 
and remove the misfed 
paper.

Check the paper reversing 
section inside the tray and 
remove any misfed paper.

(5) Paper misfeed in the fusing unit

Tilt the fusing unit cover 
down toward you.

Rotate knob and remove the 
misfed paper.

(6) Paper misfeed in the exit tray unit (right 

tray)

Remove the misfed paper.

(7) Paper misfeed in the reversing unit

Open the Paper reversing 
section cover and remove 
the misfed paper.

After removing the misfeed, open and close the 
automatic document feeder (or the document feeding 
area cover or document feeder tray) to clear the 
misfeed display from the touch panel.

Caution

The fusing unit area is hot. Take care not to burn
yourself. (Do not touch any metal parts.)

Unfused toner may remain on the paper that is 
removed. Take care that it does not soil your hands or 
clothing.

Содержание MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов