Sharp MX-M503N Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 806

Sharp MX-M503N Скачать руководство пользователя страница 75

1-34

BEFORE USING THE MACHINE

LOADING PAPER IN THE BYPASS TRAY

The bypass tray can be used to print on plain paper, envelopes, label sheets, tab paper, and other special media. Up to
100 sheets of paper can be loaded (up to 40 sheets of heavy paper) for continuous printing similar to the other trays.

1

Open the bypass tray.

When loading paper larger than A4R or 8-1/2" x 11"R, be sure
to pull out the bypass tray extension. Pull the bypass tray
extension all the way out. If the bypass tray extension is not
pulled all the way out, the size of the loaded paper will not be
correctly displayed.

Do not place heavy objects on the bypass tray or press down on the tray.

2

Set the bypass tray guides to the width
of the paper.

3

Insert the paper along the bypass tray
guides all the way into the bypass tray
until it stops.

Load the paper with the print side face down.

• Do not force the paper in.

• If the bypass tray guides are set wider than the paper, move the bypass tray guides in until they correctly fit the

width of the paper. If the bypass guides are set too wide, the paper may skew or be creased.

«
...
73
74
75
76
77
...
»

Содержание MX-M503N







































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов