Sharp MX-2300 G Скачать руководство пользователя страница 326

Страница: 326 / 428

MX-2300/2700 N/G EXTERNAL OUTFIT A – 2

2) Remove the desk connection cover (A). Remove the screws,

then remove the left cabinet rear lower (B) and the left cabinet
(C).

(5) Upper cabinet right
(6) Upper cabinet left.

1) Remove the SPF glass (A). Remove the glass holder (B) and

the table glass (C).

2) Remove the screws, and remove the upper cabinet right (A)

and the upper cabinet left (B).

(7) Upper cabinet rear cover

1) Remove the upper cabinet rear cover lid (A). Remove the

screws, and remove the upper cabinet rear cover (B).

(8) Upper cabinet rear

1) Remove the upper cabinet rear cover.
2) Disconnect the connector. Remove the screws, and remove the

grounding wire. Remove the screws, and remove the upper
cabinet rear.

(9) Front cabinet upper

1) Open the front cabinet. Remove the screws, and remove the

front cabinet upper.

(10) Right cabinet front
(11) Right connection cabinet
(12) Right cabinet rear cover
(13) Right cabinet rear

1) Remove the front cabinet upper. (Refer to Front Cabinet

Upper.)

2) Open the right door and the right cabinet lower.

Содержание MX-2300 G













































































































































































































































































































































































































































Результаты поиска

Содержание MX-2300 G

Отзывы:

Sharp MX-2300 G, Руководство по обслуживанию, Страница: 326 / 428

Результаты поиска

Содержание MX-2300 G

Отзывы: