Sharp MX-2300 G, Руководство по обслуживанию, Страница: 225 / 428

MX-2300/2700 N/G SIMULATION 7 – 119
63-8
Purpose : Setting
Function (Purpose) : Used to execute the standard value reset of
the engine auto adjustment scanner target
value (for servicing).
Section : Image process (ICU)
Item : Image quality (Color balance)
Operation/Procedure
1) Press [EXECUTE] button.
[EXECUTE] button is highlighted and [YES] and [NO] buttons
become active.
2) Press [YES] button.
The standard value reset of the engine auto adjustment scan-
ner target value is executed. [YES] button is highlighted.
* When [NO] button or [EXECUTE] button is pressed, [EXE-
CUTE] button returns to the normal display, and [YES] and
[NO] buttons gray out.
* The restored data are saved to EEPROM and RAM.
* During execution of the standard value reset of the engine
auto adjustment scanner target value, [EXECUTE] and
[YES] buttons are highlighted.
* After completion of the standard value reset of the engine
auto adjustment scanner target value, [EXECUTE] button
returns to the normal display and [YES] and [NO] buttons
gray out.
<Standard value reset item>
63-11
Purpose : Setting
Function (Purpose) : Used to set the factory target color balance
in the auto color balance adjustment
(SIM46-24).
Section : Scanner (Scanning)
Item : Image quality
Operation/Procedure
1) When the machine enters Simulation 63-11, the button of the
current set value of the target value table is highlighted.
2) When the button of the target value to be changed ([DEF2]
button in this example) is pressed, it is highlighted and the set
value is saved to EEPROM and RAM.
* Only one item can be selected.
<Display data item description>
64
64-1
Purpose : Operation test/Check
Function (Purpose) : Used to execute self-print (Color mode).
Section : Printer
Item : Operation
Operation/Procedure
1) Press [K][C][M][Y] button to select a color.
The selected button is highlighted. When the highlighted but-
ton is pressed, it returns to the normal display. (Two or more
buttons can be selected.)
2) Select the set item with [
↑
] and [
↓
] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
↑
], an active display is made and
item is shifted.
If there is no item over [
↑
], the display grays out and the
operation is invalid.
If there is any item under [
↓
], an active display is made and
item is shifted.
If there is no item over [
↓
], the display grays out and the
operation is invalid.
3) Enter the set value with 10-key.
* Press [C] key to clear the entered values.
4) When [EXECUTE] button is pressed, the currently set self-
print is started.
[EXECUTE] button remains highlighted during self-printing,
and returns to the normal display after completion of self-print-
ing.
* When [OK], [
↑
], [
↓
] button, [COLOR], or [BLACK] key is
pressed, the value is set to the set item. (The value is not
saved to EEPROM and RAM.)
* When [C], [CA], or [SYSTEM SETTINGS] key is pressed
during self-printing, the operation is interrupted.
* When the machine returns to the ready state after occur-
rence of an interruption (paper empty, jam, etc.), self-printing
is resumed.
* When paper is selected which does not satisfy the paper
feed and paper exit conditions, printing cannot be made.
1 Auto density adjustment target value (KCMY)
K C
M Y
SETUP
SIMULATION NO.63
㧙
07
TEST
SCANNER TARGET OF COLOR CALIB SETUP:SERVICE
#B:
91, #C 2944, #D: 3227, #E: 5822, #F: 8600
#G: 28935, #H: 54344, #I: 86968, #J: 122678, #K: 151198
#L: 169731, #M: 195950, #N: 201249, #:O: 207112
1/1
0
CLOSE
0
SIMULATION NO.63
㧙
08
TEST
STANDARD SCANNER TARGET SETTING:SERVICE
CLOSE
EXECUTE
ARE YOU SURE?
YES NO
Item
Set
value
Content
Default
value
Target value table select DEF1 DEF1 mode setting DEF1
DEF2 DEF2 mode setting
DEF3 DEF3 mode setting
0
DEF1
SIMULATION NO.63
㧙
11
TEST
STANDARD SCANNER TARGET SELECT OF ENGINE HALFTONE AUTO ADJUSTMENT
1/1
TARGET TBL DEF2 DEF3
㧦
CLOSE