Sharp MX-2300 G, Руководство по обслуживанию, Страница: 140 / 428

MX-2300/2700 N/G SIMULATION 7 – 34
26-65
Purpose : Setting
Function (Purpose) : Used to set the finisher alarm mode.
Section : —
Item : Specifications
Operation/Procedure
1) When the machine enters Simulation 26-65, the following
screen is displayed.
* The current set value is highlighted.
2) When the set value button of an item to be changed is
pressed, it is highlighted and the setting is saved to EEPROM
and RAM.
* Only one can be selected for each item.
<Item description>
<LIMIT SHEETS>
* Valid only when the 1K finisher is installed.
[Target paper size]
Staplable S-size paper described on the product specifications
A4, A4R, B5, B5R, 8.5 x 11, 8.5 x 11R, 16K, 16KR
* 25 sheets for L-size paper (A3, B4, 11 x 17, 8.5 x 14, 8.5 x 13,
8K) regardless of setting
* 25 sheets for mixed loading of a same width regardless of setting
26-67
Purpose : Setting
Function (Purpose) : Used to set the summer time (switching
timing to the summer time and the adjust-
ment time (shift amount)) and the time zone
(for switching to the summer time and the
difference between the local time and GMT
(UTC) for synchronization with the internet
time server).
Section : —
Item : Specifications
Operation/Procedure
1) Select a mode to be set. ([SUMMER TIME] is selected in this
example.)
* When [TIME ZONE] or [SUMMER TIME] button is pressed,
it is highlighted and item of the selected button is displayed.
* Only one can be selected, and the selected button is high-
lighted.
In the default display, [TIME ZONE] is selected.
2) Change the set item with [
↑
] and [
↓
] buttons.
The highlighted section of the set value is switched and the
value is displayed in the setting area.
* When there is an item over [
↑
], the display becomes active
and shifts to another item.
When there is no item over [
↑
], the display grays out and the
operation is disabled.
When there is an item under [
↓
], the display becomes active
and shifts to another item.
When there is no item under [
↓
], the display grays out and
the operation is disabled.
3) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
4) When [OK] button is pressed, it is highlighted and the current
set value is saved to EEPROM and RAM.
After completion of setting, [OK] button returns to the normal
display.
* When [OK], [
↑
], [
↓
] button, [COLOR], or [BLACK] key is
pressed, the current set value is saved to EEPROM and
RAM.
<Setting range and default value of each value>
Item
Set
value
Content
Setting
range
Default
value
LIMIT
SHEETS 30 Staple limit sheets: 30 sheets 30 or 50 30
50 Staple limit sheets: 50 sheets
LIMIT
COPIES ON Staple limit copies ON ON or OFF ON
OFF Staple limit copies OFF
SIMULATION NO.26-65
TEST
FINISHER ALARM MODE SETUP (STAPLE LIMIT)
30
50
LIMIT SHEETS :
1/1
0
ON OFF LIMIT COPIES :
CLOSE
Category Item Display Content
Setting
range
Default
value
Remark
TIME ZONE A GMT +/- + GMT +/– 0 1
– 1
B GMT HOUR GMT HOUR 0 to 13 *
C GMT MINUTE GMT MINUTE 0 to 59 *
D INTERNET YES Internet time YES/
NO 0 * When YES, time is synchronized with
the internet time server.
NO 1
SUMMER
TIME Common A AUTO SUMMER
TIME ADJ ON Auto summertime
setting ON/OFF 0 *
OFF 1
B ADJ TIME HOUR Adjustment time
HOUR 0 to 23 1
C ADJ TIME MINUTE Adjustment time
MINUTE 0 to 59 *