manualshive.com logo in svg

SEW-Eurodrive MOVIFIT FC, Руководство по эксплуатации, Страница: 162 / 228

Поделиться
Скачать
SEW-Eurodrive MOVIFIT FC Скачать руководство пользователя страница 162

7

Operation

Status LEDs MOVIFIT® FC

Operating Instructions – MOVIFIT

®

 FC

162

"STO" LED

The following table shows the statuses of the "STO" LED:

LED

Meaning

Yellow

Illuminated

Drive is in Safe Torque Off ("STO active").

Off

Drive is not in Safe Torque Off ("STO inactive").

"F-STATE" LED

The following table shows the statuses of the "F-STATE" LED:

LED

Meaning

Measure

Green

Illuminated

The S11 option is currently per-
forming a cyclical data ex-
change with the F-Host (data
exchange).

Standard operating state.

-

Red

Illuminated

Fault status in the safety part.

24V_O supply voltage not avail-
able.

• Read diagnostics in F-Host.
• Eliminate the cause of the fault

and acknowledge in the F-Host.

Off

S11 option is currently in the ini-
tialization phase.

S11 option is not available or is
not configured in the bus master
(slot 1 is empty).

• Check voltage supply.
• Check configuration of the bus

master.

Red/green

Flashing

A fault occurred in the safety
part; cause of the fault already
remedied – acknowledgement
required.

• Acknowledge fault in the F-Host

(reintegration).

 

 

21316996/EN – 12/2014

 

Содержание MOVIFIT FC





































































































































































































































Отзывы:

Нет отзывов