Servomex NanoTrace DF-760E, Инструкция по эксплуатации

Страница: 115 / 182

User Interface DF-760E 111
used to choose the appropriate relay number. The
NEXT
key is then used to move to the
Activate/Deactivate
field where the arrow keys ( and ) are used to toggle between
the two options. The
NEXT
key is then used to move to the
Apply
field where the
Enter
key is hit to change the relay state. This process can be repeated as often as needed. When
done, the
NEXT
key is used to move to the
Done
field and the
Enter
key is hit to leave
the screen. The condition of the relays before the test is restored when the test is
concluded. See the section on relay ports found on page 43 for additional information.
Figure 127: Test Oxygen Relay
7.7.8 Test Analog Outputs
Figure 128: Test Analog Outputs Menu
7.7.8.1 Test Moisture Analog Output
The Test Output screen, as shown in Figure 129 is used to calibrate the moisture analog
recorder output. When the Test Output screen is selected, the
NEXT
key is used to move
to the percentage field where the arrow keys ( and ) are used to choose the
appropriate setting. The NEXT key is then used to move to the Apply field where the
Enter key is hit to set the analog output to the selected value. The analog output response
should match the value that was entered. For example, if 80 percent is entered for the
percent full scale level, and the analog output is set for 0 to 10 VDC, the analog output is