Sea Recovery Aqua Whisper DX 1400-2, Руководство пользователя

Страница: 64 / 226

Aqua Whisper DX Modular 450-1800
Page 3-24
Pre-installa
tion
Fresh Water Tank High Level Switch ** owner/ •
installer supplied provides an optional feature to
the System Control Logic that allows the System to
shut off automatically when the Fresh Water Tank is
full, when the System is operated in the Automatic
mode. Additionally, the System will not start in the
Automatic mode when the Fresh Water Tank High
Level Switch signals the System Control Logic that
the Fresh Water Tank is full.
When installed and connected to the Main Printed Circuit
Board, the Fresh Water Tank High Level Switch must be
connected as a N.C. (Normally Closed) 1PST (One Pole
Single Throw) switch.
When the Fresh Water Tank is several inches below
the full mark the switch is Closed. As water rises and
reaches the top of the full mark the switch Opens. This
informs the System Control Logic that the Fresh Water
Tank is full.
If operation of the System is desired when the Fresh
Water Tank Switch signals the System Control Logic that
the Fresh Water Tank is full then the System may be
operated in the Manual mode.