Manual revision 001
Section 4: Deploying and Operating SBE 39
plus
-IM
SBE 39
plus
-IM
74
6.
Click the Upload menu to upload stored data. SeatermIM responds
as follows:
A.
SeatermIM sends a wake-up tone.
B.
SeatermIM sends
#iiGetSD
and displays the response.
#iiGetSD
provides information on the instrument status, and number
of samples in memory.
C.
In the Save As dialog box, enter the desired upload file name and
click Save. The upload file has a .XML extension.
D.
An Upload Data dialog box appears:
Make the desired selections.
Defines data upload type and range:
•
All data as a single file – All data is uploaded
into 1 file.
•
By scan number range – Enter beginning scan
(sample) number and total number of scans. All
data within range is uploaded into 1 file.
To change upload file name selected in Step C
above, click Browse to navigate to desired upload file
path and name. Upload file has a .xml extension.
After SeatermIM uploads data into .xml data file, it
then automatically creates .asc file. This file is placed
in same directory as .xml data file, and have same
name (but different extension).
Select number of bytes uploaded in each block.
SeatermIM uploads data in blocks, and calculates a
checksum at end of each block. If block fails
checksum verification, SeatermIM tries to upload
block of data again, cutting block size in half.
