Operation & Maintenance Manual
──
LG946L Wheel Loader
75
the ground.
z
If the material sticks onto the bucket, move the working equipment control lever cyclically
to allow the bucket to tilt forward or backward to shake down the material.
z
After dumping, use the bucket to level equipment (if assembled). Rear tilt bucket to level
position, and operate the working equipment control handle to allow the lift arm to lower to
prepare for next operation.
(5)
Pushing Operation
Level the bucket to the ground, and push the
accelerator to move forward. If there is blockage during
moving, raise the lift arm a little and move forward
continuously. When operating the lift arm to lift or
lower, operate the control lever between lifting and
lowering operation.
Never
use the lever at the raising
or lowering position to ensure pushing the bucket smoothly.
(6)
Striking Operation
Tilt the bucket to let the blade touch the ground.
For hard ground, put the lift arm control lever in the
float position; for soft ground, put the lift arm
control lever in the neutral position.
Use reverse gear to strike the ground with blade.
(7)
Towing Operation
△
!
WARNING
Before towing, the tires must be blocked by the parking brake to
prevent the machine from rolling.
During towing, be careful to prevent severe and fatal injury.
z
If possible, the engine of the towed machine should keep the engine running to ensure
△
!
NOTICE
Watch the torque converter oil temperature gauge all the time
during a pushing operation. If the temperature is too high, stop
the machine to let it cool down and then continue to work.
