Operation & Maintenance Manual
──
LG946L Wheel Loader
67
Box, in this chapter.
3)
Check the engine oil in the engine oil pan. Refer to 3.6.1 Fuel Supplying of Engine in
this chapter.
4)
Open the water tank cover to check the water level in the water tank.
5)
Check the brake oil in the oil bowl of the brake booster pump.
6)
Check the seal ability of the oil pipe, water pipe, air pipe and other parts.
7)
Check the seal ability of the hydraulic pipes and the surrounding pipes.
8)
Check the wire connection of the storage battery.
9)
Check the pressure of the tire to see whether it is normal. Please refer to CHAPTER II
8.1 Performance.
10)
Check the control levers (or handles) to see whether they are sensitive and in the neutral
position.
11)
Adjust the seat position to sit comfortably. Please refer to 1.2.10 Adjustment of Cab’s
Seat, in this chapter.
12)
Check the safety belt (if assembled) and other safety equipment for good working order.
13)
Start the full checking list the engine only after completing.
3.2.2 Engine Starting
Points for attention of starting engine:
z
Make sure all the control levers are in the neutral position before starting; make sure the gear
control lever is in neutral position, and put the switch in its original position.
z
Step on the accelerator slowly when starting to prevent breaking parts.
z
Follow the correct starting steps to start the engine.
z
Refer to Diesel Engine Usage and Maintenance User Manual for other operations of diesel
engines.
Steps of starting engine:
z
Put the shifting control lever to the
neutral
position
z
Turn the start key clockwise to the
ON
position. Connect the power switch and ring the
horn.
z
Turn the starting key to the
ON
position. Connect the power switch, and press the
accelerator slowly. Then turn to the
START
position. After releasing the starting key, it will
go back to the
ON
position automatically. The starting time is not more than 5~10 seconds,
(the engine starting effort not be more than 15 seconds).
z
Try again if the machine does not start the first time. But the alternation time should be more
than 1 minute. If the engine does not start after these tries, please check the machine and
