SDLG LG946L Скачать руководство пользователя

Страница: 4 / 109

Operation & Maintenance Manual

──

LG946L Wheel Loader

PREFACE

Thank you for purchasing the wheel loader produced by Shandong Lingong.

This manual is a guideline for users to operate and maintain this machine properly, and place it

in the bag behind the cab seat or inside the door. All personnel should be ready to read it at times.

If this manual is lost or damaged, please contact with our company or dealers for a new one.

If you sell the machine, be sure to give this manual to the new owners.

Parameters, figures and information included in this manual apply only to basic loaders. For

those derivative products, please consult us or refer to the relative manuals.

When selecting working equipment, please follow the user manual of the working equipment to

assemble and disassemble, replace and use.

In addition, please read carefully the attached technical user manual for the diesel engine and

other functioning parts about operation, use and maintenance.

We are continually striving to improve the quality of our products, to produce more advanced

and a safer engineering machine. We reserve the right, at our sole discretion, to change or modify

our design, but we do not promise to apply the changes to products that are sold. We also reserve

the right to change the data and machine, and the right to maintain it. The design, operation and

user information in this document is subject to change without notice. Customer feedback is very

welcomed. If you would like to comment on any aspect of this manual or our products in general,

please feel free to contact us.

Please give us feed back about the shortcomings immediately upon using our products, so that

we can continue to improve our products to satisfy your requirements.

All rights are reserved. The contents of this publication may not be reproduced in any form, or

communicated to a third party without prior written permission of Shandong Lingong

Construction Machinery Co. Ltd.

Содержание LG946L














































































































Результаты поиска

Содержание LG946L

Отзывы:

Похожие инструкции для LG946L

Бренды по названию

Популярные бренды

SDLG LG946L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание LG946L

Отзывы:

Похожие инструкции для LG946L

Бренды по названию

Популярные бренды