Operation & Maintenance Manual
──
LG946L Wheel Loader
14
pressure before removing the cap of radiator.
3.6 Road Driving
z
Pay attention to the stability of the front and rear of the machine during operation, since
work equipment may block vision at the front while the load is concentrated on the back
wheels.
z
Be sure there is no fog, soot, sand or dust cloud that may block vision.
z
Examine the working area and the road condition.
Check whether there are holes, blockages, slosh or
ice.
z
Understand the objective of the operation; be sure
to understand the meaning of the flags, signals, and
labels before the operation begins.
3.7 Prevent Crushing or Cutting Body Parts
z
Do not put your hand, arm or other parts of your
body into movable parts of equipment. If the
working equipment is in operation, the clearance
will change and this may lead to serious damage or
personal injury when standing too close. The
engine must be turned off and the working
equipment must be locked if people have to work
between the moving components.
z
Make sure the supporter and the accessories are
correctly set when some one works under the
machine. Do not use the hydraulic tank as support.
The accessories may go down and result in an
accident when the control system moves or the
hydraulic tubes leaks.
z
Never do any adjustments when the machine is
operating or the engine is working unless there is
an outstanding reason, such as an emergency.
z
Stay far away from any rotating and moving parts.
z
Make sure there is no sundry on the vane of engine. Vane could shoot off or cut off the
