SDLG LG946L Скачать руководство пользователя страница 58

Страница: 58 / 109

Operation & Maintenance Manual

──

LG946L Wheel Loader

Press bottom side, rain wiper will work; press top side, the rain wiper will stop.

Water Spraying Switch:

Press bottom side, spray water to the front glass of the cab; press top side, stop spraying.

Top Lamp Switch:

This switch is behind the ceiling lamp in the

operator cab.

Press

position to turn it on.

Press

OFF

position to turn it off.

Turn it off during driving.

Fan Switch:

Press the bottom side for low air speed;

Press the top side for high air speed;

Press the middle of the button, and the fan will stop.

Horn Switch:

Press the button in the middle of the steering wheel, and the horn will sound.

Power Switch

The switch locates on the left side of rear frame. The

power of the whole vehicle is shut off when the switch

turns to the ‘ ’ position; The power of the whole vehicle

is turn on when the switch turns to the ‘ ’ position.

Please shut the power switch if park the vehicle for a

long time.

1.2.3 Steering Wheel

The steering wheel and steering unit are connected. Turning the steering wheel clockwise,

the machine turns right; turning the steering wheel anticlockwise, the machine turns left.

The features are listed below:

The rotation angles of the steering wheel and the machine are not equal. If the steering

wheel is continuously turned; the machine rotation angle will increase until at the needed

position.

The faster the steering wheel turns, the faster the machine turns.

The steering wheel will not automatically come back after turning, the turning angle of the

machine will be kept. After finishing turning the machine, turn the steering wheel in the

reverse direction to keep the machine moving in a straight direction.

1.2.4 Control Levers and Pedals

Shifting Control Lever

Содержание LG946L














































































































Результаты поиска

Содержание LG946L

Отзывы:

Бренды по названию

Популярные бренды

SDLG LG946L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание LG946L

Отзывы:

Бренды по названию

Популярные бренды